November Sale - 5% OFF - Code: NOV5
Price Match Guarantee
Free Shipping on Orders Over $50
No Minimum Order
Deals: $5 off orders over $100 with code 5OFF, $10 off orders over $200 with code 10OFF, $25 off orders over $500 with code 25OFF

Surveying Tripods

(40 Styles Available)
  • Ships Factory Direct
  • Full Manufacturer Warranty
  • 30 Day Money Back Guarantee
  • Price Match Guarantee

Surveying Tripods

(40 Styles Available)
  • Ships Factory Direct
  • Full Manufacturer Warranty
  • 30 Day Money Back Guarantee
  • Price Match Guarantee

Frequently Asked Questions

What are surveying tripods used for?

Surveying tripods are used for supporting and keeping survey equipment stable, particularly while working on uneven terrain. These surveying equipment include total stations, laser levels, transits, optical levels, and theodolites, among others.

As far as stability and vibration damping are concerned, is a wood tripod better than steel or aluminum?

Generally speaking, yes. Wood tripods are less affected by changes in temperature, and they can provide better stability and vibration damping than aluminum or steel. Fiberglass,  wood/fiberglass, and carbon fiber tripods are also worth considering when it comes to vibration damping.

Why are tripods or three-legged pods used in land surveying instead of pods with four legs?

Compared to four-legged pods, tripods are easier to calibrate and position directly above an exact point on the ground. Moreover, it’s far more difficult to keep four legs balanced than it is to balance the three legs of tripods, especially on rough terrain.

What are the benefits of using a tripod for leveling?

In leveling tasks, tripods can provide mounted instruments with stability. Users can also extend the tripods’ legs to the height needed for their leveling instruments. In other words, tripods enable the instruments to level accurately and perform optimally.

Can I use a camera tripod instead of a surveyor’s tripod for surveying applications?

While it’s possible to install some surveyor tripod parts to a camera tripod, it isn’t recommended to use this type of tripod since it cannot provide the needed stability, performance, and accuracy for surveying. Also, because camera tripods are normally more expensive, photographers use the best surveying tripods and not the other way around.

What thread size do surveying tripods use?

Most surveying tripods, including nearly all models in this category, use a 5/8" x 11 thread on the head. That is the standard fastener for automatic levels, theodolites, total stations and most rotating lasers. If your instrument uses a different mount, you will need an adapter. Check the thread size listed in each product's specifications before you order.

What is an elevating tripod?

An elevating tripod has a center column that raises the instrument above the height of the legs, usually with a geared crank. It is used to set rotating lasers high, sight over vehicles or walls, and work on uneven sites. Nedo elevating tripods here reach maximum heights from 80" up to 157", and the Northwest Instrument NAT96 extends to 9 feet.

What is the difference between a flat-head and a dome-head tripod?

A flat-head tripod has a flat mounting plate. It is the usual choice for levels, theodolites and total stations. A dome-head tripod has a rounded top. The instrument can slide on the dome so you can get it close to level before tightening the center screw, which speeds up setup for lasers and builders' levels.

Should I buy a fiberglass or an aluminum tripod?

Aluminum tripods are light and usually simpler, which suits contractors who move the tripod often. Fiberglass composite legs, like those on the Dutch Hill GT2000 series, do not shrink or swell with moisture and are built for heavier instruments. Carbon fiber versions, such as the GT2000CF, cut weight further. Pick based on instrument weight, site conditions and how far you carry the tripod.

Can I use a tripod to hold a prism pole?

Not a standard instrument tripod. A prism pole tripod clamps around the pole instead of mounting an instrument on top. The Northwest Instrument NTP12 and Dutch Hill DH04-002 and DH04CF-005 are made for this. They hold the pole steady so you can plumb it with the pole bubble and keep it in place while the instrument operator takes a shot.

How much weight can a surveying tripod hold?

It depends on the model. Dutch Hill lists a 50 lb maximum work load and a 100 lb capacity test for the GT2000 series. Check the load figure on each product page and compare it with the weight of your instrument plus any accessories. Robotic total stations and scanners call for heavy-duty or extra-heavy-duty tripods.

Surveying Tripods

What a surveying tripod does

A surveying tripod holds an instrument steady over a point while you sight, measure or set grade. Nearly every tripod in this category uses the standard 5/8" x 11 thread, so it will accept most automatic levels, theodolites, total stations and rotating lasers. The right tripod comes down to leg material, head style, working height and how much weight you carry between setups.

Types of tripods in this category

  • Wood and wood/fiberglass. Nedo wooden tripods use European hardwood with a plastic coating, brass hinge pins and an aluminum head. The Nedo 200511 has fixed legs for first-order leveling. Northwest Instrument's NWFT98A and NWFT99A combine wood and fiberglass and extend from 43" to 72".
  • Fiberglass and carbon fiber. The Dutch Hill GT2000 series uses fiberglass composite legs that do not shrink or swell with moisture, a Quick Cam-Lock leg clamp and replaceable stainless steel points. The GT2000CF and GT2000CFA use a carbon/glass hybrid and weigh about 10.75 lbs. The ELT3000 and ELT3000A extend to 93".
  • Aluminum. Lighter and simpler. Options include the Nedo 200204 (40" to 68"), the Nedo 200225 with Retract-and-Go leg locks, and Northwest Instrument contractor's tripods such as the NAT83 and NAT84 (38" to 62").
  • Elevating. A geared center column raises the instrument well above leg height. Nedo models range from the 210616 (31" to 80") to the 210443 (70" to 157"). The Northwest Instrument NAT96 reaches 9 feet. Nedo's 10' and 13' Jumbo tripods are built for machine control.
  • Prism pole tripods. The Northwest Instrument NTP12 and the Dutch Hill DH04-002 and DH04CF-005 hold a range or prism pole in place. The DH04CF-005 fits poles from 1" to 1.5" in diameter.

How to choose

Head style. A flat head is the common choice for levels and total stations. A dome head lets you rough-level a laser or level by sliding it on the head before you tighten it. Northwest Instrument sells both, for example the NAT81 flat-head and NAT82 dome-head tripods.

Working height. Compare each model's minimum and maximum height with how you work. Standard tripods here top out between about 62" and 93". For shooting over obstacles or setting a rotating laser high, look at elevating models. Several Nedo elevating columns carry inch and millimeter scales so you can set a repeatable height.

Load and weight. Dutch Hill lists a 50 lb maximum work load for its GT2000 series. Heavier gear such as robotic total stations and 3D scanners calls for a heavy-duty or extra-heavy-duty model, like the Nedo 210683 with added leg struts.

Leg locks. Quick clamps and cam locks set up faster. Wing nut and screw clamps, such as the NWFT98A and Nedo 200533, tighten by hand.

Visibility. Yellow powder-coated models, such as the NAT93 and NAT94, are easier to spot on a busy site.

Brands carried

This category includes tripods from Nedo, Dutch Hill and Northwest Instrument. To complete a setup, see prism poles and leveling rods.

GET $5 OFF

FOR YOUR FIRST ORDER INSTANTLY

⟩

I’m not interested in saving money on my order

Enjoy Your Coupon Code Now!

Shop with confidence, your satisfaction is guaranteed.
⟩
WELCOME5 SHOP NOW