Cabinet Heaters
(5 Styles Available)- Ships Factory Direct
- Full Manufacturer Warranty
- 30 Day Money Back Guarantee
- Price Match Guarantee
Heating Equipment Best Sellers
Cabinet Heaters
(5 Styles Available)- Ships Factory Direct
- Full Manufacturer Warranty
- 30 Day Money Back Guarantee
- Price Match Guarantee
Frequently Asked Questions
Can a cabinet unit heater be mounted on the ceiling?
What does 3/5 kW mean on a cabinet heater?
Does a cabinet unit heater need a separate wall thermostat?
What voltage cabinet heater do I need?
How do I maintain a cabinet unit heater?
Cabinet Heaters
What a cabinet unit heater is
A cabinet unit heater is an electric heater with its element, blower and controls inside an enclosed metal cabinet. A fan draws room air in through a grille, passes it over the element and blows it back into the space. Cabinet heaters are common in entryways, corridors, lobbies and classrooms, where they mount on a wall or ceiling, out of the way of foot traffic.
TPI 6300 Series Multiple Angle Cabinet Unit Heaters
The cabinet heaters in this category are TPI 6300 Series models. TPI lists them for commercial and institutional buildings such as stores, schools, offices, transportation terminals, churches and entranceways. They mount on a wall or ceiling and can be surface mounted, semi-recessed or fully recessed. Airflow is front in, front out, with air entering and leaving through the face of the cabinet.
Each model has high and low settings for both heat and blower speed. The motor is a two-speed, shaded pole, resilient mounted, direct drive type. A disconnect switch, a dust filter and a beige powder-coated finish are listed on these models. Control is a built-in single-stage thermostat with relays, run from an internal 24V source, with a 40 to 110°F range.
Sizes and power options
Two output ranges are offered. The first number is the low heat setting and the second is the high setting.
- 3/5 kW, 208V, 1/3 phase (6333D052033B30D0F)
- 3/5 kW, 240V, 1/3 phase (6333D052433B30D0F)
- 3/5 kW, 480V, three-phase (6333D054833B30D0F)
- 6/10 kW, 240V, 1/3 phase (6346D102433B30D0F)
- 6/10 kW, 480V, three-phase (6346D104833B30D0F)
Models marked 1/3 phase can be wired for either supply. The 208V listing notes that it is factory wired for three-phase and field convertible to single-phase with a 24V control circuit.
How to choose
Start with the building supply. Match voltage and phase first, since a 480V model will not run on 240V. Then size the output. One kilowatt of electric heat is about 3,413 BTU per hour, so a 5 kW setting delivers about 17,000 BTU and a 10 kW setting about 34,000 BTU. Entryways with frequent door openings and rooms with high heat loss need the larger size.
Next, decide how the cabinet will be installed. Surface mounting is the simplest. Recessed and semi-recessed installations need a wall or ceiling opening planned at rough-in, and TPI offers TF-33 and TF-46 trim frames to finish them. KB33, KB46 and KB79 kickbases stand a cabinet on a pedestal. Match the frame or kickbase size to the cabinet. These accessories are listed under heater mounts.
A qualified electrician should size the circuit and confirm local code requirements. For other ways to heat entries, shops and open areas, compare fan forced heaters or browse all heating equipment.
