Calculated Industries ConversionCalc Plus - 8030
Calculated Industries Warranty
All CI products are covered by a minimum 1-year limited warranty against defects in materials and workmanship. Some products are covered by a 2-year limited warranty*. Calculated Industries ("CI") warrants all products against defects in materials and workmanship for a minimum period of one (1) year from the date of original consumer purchase in the U.S., some products have a 2-year limited warranty. If a defect exists during the warranty period, CI at its option will either repair (using new or remanufactured parts) or replace (with a new or remanufactured unit) the product at no charge.
THE WARRANTY WILL NOT APPLY TO THE PRODUCT IF IT HAS BEEN DAMAGED BY MISUSE, ALTERATION, ACCIDENT, IMPROPER HANDLING OR OPERATION, OR IF UNAUTHORIZED REPAIRS ARE ATTEMPTED OR MADE. SOME EXAMPLES OF DAMAGES NOT COVERED BY WARRANTY INCLUDE, BUT ARE NOT LIMITED TO, BATTERY LEAKAGE, BENDING, OR VISIBLE CRACKING OF THE LCD (e.g. black ink spot on screen, etc.), WHICH ARE PRESUMED TO BE DAMAGES RESULTING FROM MISUSE OR ABUSE.
* Products with a 2-year limited warranty against defects in materials and workmanship
AccuMASTER 2-in-1 Digital Angle Gauge (Model #7434)
AccuMASTER Digital 6 Inch Caliper (Model #7418)
AccuMASTER Digital Fraction Caliper (Model #7408)
DigiRoller Plus III (Model #6575)
Laser Dimension Master 130 (Model #3356)
Wheel Master 4S (Model #6410)
Wheel Master 4D (Model #6435)
Wheel Master Classic 12 (Model #6530)
Wheel Master Pro 12 with Case (Model #6540)
Disclaimer
CI MAKES NO WARRANTY OR REPRESENTATION, EITHER EXPRESS OR IMPLIED, WITH RESPECT TO THE PRODUCT'S QUALITY, PERFORMANCE, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE. AS A RESULT, THIS PRODUCT, INCLUDING BUT NOT LIMITED TO, KEYSTROKE PROCEDURES, MATHEMATICAL ACCURACY AND PREPROGRAMMED MATERIAL, IS SOLD "AS IS," AND YOU THE PURCHASER ASSUME THE ENTIRE RISK AS TO ITS QUALITY AND PERFORMANCE.
IN NO EVENT WILL CI BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY DEFECT IN THE PRODUCT OR ITS DOCUMENTATION.
The warranty, disclaimer, and remedies set forth above are exclusive and replace all others, oral or written, expressed or implied. No CI dealer, agent, or employee is authorized to make any modification, extension, or addition to this warranty.
Some states do not allow the exclusion or limitation of implied warranties or liability for incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific rights, and you may also have other rights which vary from state to state.
Calculated Industries Warranty
All CI products are covered by a minimum 1-year limited warranty against defects in materials and workmanship. Some products are covered by a 2-year limited warranty*. Calculated Industries ("CI") warrants all products against defects in materials and workmanship for a minimum period of one (1) year from the date of original consumer purchase in the U.S., some products have a 2-year limited warranty. If a defect exists during the warranty period, CI at its option will either repair (using new or remanufactured parts) or replace (with a new or remanufactured unit) the product at no charge.
THE WARRANTY WILL NOT APPLY TO THE PRODUCT IF IT HAS BEEN DAMAGED BY MISUSE, ALTERATION, ACCIDENT, IMPROPER HANDLING OR OPERATION, OR IF UNAUTHORIZED REPAIRS ARE ATTEMPTED OR MADE. SOME EXAMPLES OF DAMAGES NOT COVERED BY WARRANTY INCLUDE, BUT ARE NOT LIMITED TO, BATTERY LEAKAGE, BENDING, OR VISIBLE CRACKING OF THE LCD (e.g. black ink spot on screen, etc.), WHICH ARE PRESUMED TO BE DAMAGES RESULTING FROM MISUSE OR ABUSE.
* Products with a 2-year limited warranty against defects in materials and workmanship
AccuMASTER 2-in-1 Digital Angle Gauge (Model #7434)
AccuMASTER Digital 6 Inch Caliper (Model #7418)
AccuMASTER Digital Fraction Caliper (Model #7408)
DigiRoller Plus III (Model #6575)
Laser Dimension Master 130 (Model #3356)
Wheel Master 4S (Model #6410)
Wheel Master 4D (Model #6435)
Wheel Master Classic 12 (Model #6530)
Wheel Master Pro 12 with Case (Model #6540)
Disclaimer
CI MAKES NO WARRANTY OR REPRESENTATION, EITHER EXPRESS OR IMPLIED, WITH RESPECT TO THE PRODUCT'S QUALITY, PERFORMANCE, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE. AS A RESULT, THIS PRODUCT, INCLUDING BUT NOT LIMITED TO, KEYSTROKE PROCEDURES, MATHEMATICAL ACCURACY AND PREPROGRAMMED MATERIAL, IS SOLD "AS IS," AND YOU THE PURCHASER ASSUME THE ENTIRE RISK AS TO ITS QUALITY AND PERFORMANCE.
IN NO EVENT WILL CI BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY DEFECT IN THE PRODUCT OR ITS DOCUMENTATION.
The warranty, disclaimer, and remedies set forth above are exclusive and replace all others, oral or written, expressed or implied. No CI dealer, agent, or employee is authorized to make any modification, extension, or addition to this warranty.
Some states do not allow the exclusion or limitation of implied warranties or liability for incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific rights, and you may also have other rights which vary from state to state.
Specifications
| Overall Dimensions | 5.7" x 3.0" x 0.65" (145 mm x 76 mm x 17 mm) |
| LCD Dimensions | 0.73" x 2.56" (19 mm x 65 mm) |
| Weight | 4.15 oz (118 gm) |
| Battery Type | One 3-volt CR2016 long-life battery |
| Quantity | 1 |
| Manufacturer | Calculated Industries |
| Model Number | 8030 |
Calculated Industries ConversionCalc Plus - 8030
Price:
Product Information
Getting the measurements of materials or substances and double-checking their accuracy take up a huge amount of time. When converting these measurements, one has to spend more time on looking up formulas in books or online. For this reason, there should be a way to get a quicker and more accessible solution to this kind of problem. With the Calculated Industries ConversionCalc Plus 8030, converting anything from large units to nano-units can be quickly done right then and there.
This handheld calculator offers more than 500 conversion combinations and 70 built-in units of measurement. Anyone can convert between different measurements, particularly linear, area and volume dimensions, weight, pressure, torque, flow rate, weight per volume, energy, temperature, velocity, and power. These measurements can be displayed in different standards of unit: for instance, Fahrenheit to Réamur, tons to scruples, or liters to drams. With a plethora of conversion units and combinations, this calculator is truly a convenient tool for almost everyone, especially for professionals working in fields that require precise measurements.
For those who plan to use this calculator for a specific daily purpose, the device allows its settings to be customized. Fractions, area, volume, exponents, and mathematical operations can be conveniently adjusted to suit the user’s preferences.
Another key feature of this calculator is that users can compute for costs of goods sold per unit, making it an ideal tool for manufacturers, importers, and exporters. With its paperless tape, the last 20 data entries can be reviewed in order to carefully check the totals.
In case an incorrect entry is made, or the answer is beyond the range of the calculator, an error message will be displayed. To easily correct errors in data entries, this calculator has a backspace key. This eliminates the need to input the data again in case it has been mistyped.
To add to its accuracy, its LCD can display 14 digits, made up of 8 normal and 6 fractional digits with full annunciators and 12-digit internal accuracy. If there’s no room for error in projects or tasks, this calculator is the most dependable companion to bring anywhere as it provides precise answers to complex conversion problems.
The calculator is powered by a 3-volt CR2016 long-life battery, which can last 800 hours of actual use. However, if it has not been used for 8 to 12 minutes, it automatically shuts off to save more energy.
Besides the 3-volt battery, this calculator also comes with a protective slide cover to prevent any damage and quick reference and pocket reference guides to explain all of the great features of this device.
Converting different units of measurement can be easily done anywhere and anytime with the Calculated Industries ConversionCalc Plus 8030. Available for order here on Engineer Warehouse.
*Includes protective slide cover, quick reference and pocket reference guides, and one 3-volt CR2016 long-life battery
Specifications
| Overall Dimensions | 5.7" x 3.0" x 0.65" (145 mm x 76 mm x 17 mm) |
| LCD Dimensions | 0.73" x 2.56" (19 mm x 65 mm) |
| Weight | 4.15 oz (118 gm) |
| Battery Type | One 3-volt CR2016 long-life battery |
| Quantity | 1 |
| Manufacturer | Calculated Industries |
| Model Number | 8030 |
Calculated Industries Warranty
All CI products are covered by a minimum 1-year limited warranty against defects in materials and workmanship. Some products are covered by a 2-year limited warranty*. Calculated Industries ("CI") warrants all products against defects in materials and workmanship for a minimum period of one (1) year from the date of original consumer purchase in the U.S., some products have a 2-year limited warranty. If a defect exists during the warranty period, CI at its option will either repair (using new or remanufactured parts) or replace (with a new or remanufactured unit) the product at no charge.
THE WARRANTY WILL NOT APPLY TO THE PRODUCT IF IT HAS BEEN DAMAGED BY MISUSE, ALTERATION, ACCIDENT, IMPROPER HANDLING OR OPERATION, OR IF UNAUTHORIZED REPAIRS ARE ATTEMPTED OR MADE. SOME EXAMPLES OF DAMAGES NOT COVERED BY WARRANTY INCLUDE, BUT ARE NOT LIMITED TO, BATTERY LEAKAGE, BENDING, OR VISIBLE CRACKING OF THE LCD (e.g. black ink spot on screen, etc.), WHICH ARE PRESUMED TO BE DAMAGES RESULTING FROM MISUSE OR ABUSE.
* Products with a 2-year limited warranty against defects in materials and workmanship
AccuMASTER 2-in-1 Digital Angle Gauge (Model #7434)
AccuMASTER Digital 6 Inch Caliper (Model #7418)
AccuMASTER Digital Fraction Caliper (Model #7408)
DigiRoller Plus III (Model #6575)
Laser Dimension Master 130 (Model #3356)
Wheel Master 4S (Model #6410)
Wheel Master 4D (Model #6435)
Wheel Master Classic 12 (Model #6530)
Wheel Master Pro 12 with Case (Model #6540)
Disclaimer
CI MAKES NO WARRANTY OR REPRESENTATION, EITHER EXPRESS OR IMPLIED, WITH RESPECT TO THE PRODUCT'S QUALITY, PERFORMANCE, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE. AS A RESULT, THIS PRODUCT, INCLUDING BUT NOT LIMITED TO, KEYSTROKE PROCEDURES, MATHEMATICAL ACCURACY AND PREPROGRAMMED MATERIAL, IS SOLD "AS IS," AND YOU THE PURCHASER ASSUME THE ENTIRE RISK AS TO ITS QUALITY AND PERFORMANCE.
IN NO EVENT WILL CI BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY DEFECT IN THE PRODUCT OR ITS DOCUMENTATION.
The warranty, disclaimer, and remedies set forth above are exclusive and replace all others, oral or written, expressed or implied. No CI dealer, agent, or employee is authorized to make any modification, extension, or addition to this warranty.
Some states do not allow the exclusion or limitation of implied warranties or liability for incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific rights, and you may also have other rights which vary from state to state.
Calculated Industries Warranty
All CI products are covered by a minimum 1-year limited warranty against defects in materials and workmanship. Some products are covered by a 2-year limited warranty*. Calculated Industries ("CI") warrants all products against defects in materials and workmanship for a minimum period of one (1) year from the date of original consumer purchase in the U.S., some products have a 2-year limited warranty. If a defect exists during the warranty period, CI at its option will either repair (using new or remanufactured parts) or replace (with a new or remanufactured unit) the product at no charge.
THE WARRANTY WILL NOT APPLY TO THE PRODUCT IF IT HAS BEEN DAMAGED BY MISUSE, ALTERATION, ACCIDENT, IMPROPER HANDLING OR OPERATION, OR IF UNAUTHORIZED REPAIRS ARE ATTEMPTED OR MADE. SOME EXAMPLES OF DAMAGES NOT COVERED BY WARRANTY INCLUDE, BUT ARE NOT LIMITED TO, BATTERY LEAKAGE, BENDING, OR VISIBLE CRACKING OF THE LCD (e.g. black ink spot on screen, etc.), WHICH ARE PRESUMED TO BE DAMAGES RESULTING FROM MISUSE OR ABUSE.
* Products with a 2-year limited warranty against defects in materials and workmanship
AccuMASTER 2-in-1 Digital Angle Gauge (Model #7434)
AccuMASTER Digital 6 Inch Caliper (Model #7418)
AccuMASTER Digital Fraction Caliper (Model #7408)
DigiRoller Plus III (Model #6575)
Laser Dimension Master 130 (Model #3356)
Wheel Master 4S (Model #6410)
Wheel Master 4D (Model #6435)
Wheel Master Classic 12 (Model #6530)
Wheel Master Pro 12 with Case (Model #6540)
Disclaimer
CI MAKES NO WARRANTY OR REPRESENTATION, EITHER EXPRESS OR IMPLIED, WITH RESPECT TO THE PRODUCT'S QUALITY, PERFORMANCE, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE. AS A RESULT, THIS PRODUCT, INCLUDING BUT NOT LIMITED TO, KEYSTROKE PROCEDURES, MATHEMATICAL ACCURACY AND PREPROGRAMMED MATERIAL, IS SOLD "AS IS," AND YOU THE PURCHASER ASSUME THE ENTIRE RISK AS TO ITS QUALITY AND PERFORMANCE.
IN NO EVENT WILL CI BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY DEFECT IN THE PRODUCT OR ITS DOCUMENTATION.
The warranty, disclaimer, and remedies set forth above are exclusive and replace all others, oral or written, expressed or implied. No CI dealer, agent, or employee is authorized to make any modification, extension, or addition to this warranty.
Some states do not allow the exclusion or limitation of implied warranties or liability for incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific rights, and you may also have other rights which vary from state to state.
Covered by Full Calculated Industries Warranty!
View all Calculated Industries products
Calculated Industries Backpack Carry Case for Wheel Master Pro and Wheel Master Classic - 5010-12
Brand: Calculated Industries
$50.99
Related Categories
Special Offer
Get 5% OFF Calculated Industries ConversionCalc Plus - 8030
Get 5% OFF Calculated Industries ConversionCalc Plus - 8030
