November Sale - 5% OFF - Code: NOV5
Price Match Guarantee
Free Shipping on Orders Over $50
No Minimum Order
Deals: $5 off orders over $100 with code 5OFF, $10 off orders over $200 with code 10OFF, $25 off orders over $500 with code 25OFF

Rack Shelves

(15 Styles Available)
  • Ships Factory Direct
  • Full Manufacturer Warranty
  • 30 Day Money Back Guarantee
  • Price Match Guarantee

Rack Shelves

(15 Styles Available)
  • Ships Factory Direct
  • Full Manufacturer Warranty
  • 30 Day Money Back Guarantee
  • Price Match Guarantee

Frequently Asked Questions

What is the difference between a 2-point and a 4-point rack shelf?

A 2-point, or cantilever, shelf bolts to one pair of rails and extends out unsupported at the back. It works in 2-post racks, wall mount racks and cabinets for lighter devices. A 4-point shelf bolts to both the front and rear rails of a 4-post rack or cabinet. Kendall Howard recommends 4-point mounting for heavy devices such as servers and UPS units.

How much weight can a rack shelf hold?

It depends on the shelf design and how it mounts. In this category, the Kendall Howard 3U Centerline shelves support up to 350 lbs, the 20-inch Fixed Rack Shelf holds 300 lbs, the 2U 2-Piece Telco Rack Shelf is rated at 200 lbs and the vented sliding shelf at 100 lbs. Also check that your rack itself is rated for the total load.

What do 1U, 2U and 3U mean on a rack shelf?

U stands for rack unit, the standard height measure for 19-inch racks. One rack unit equals 1.75 inches of vertical rail space. A 1U shelf uses one unit of rail, and a 3U shelf uses three. In the Component Shelf series, the 1U, 2U and 3U sizes are 12, 14 and 16 inches. Leave enough open space above the shelf for the height of the device you place on it.

Do I need a vented rack shelf?

A vented shelf has a pattern of openings that lets air move up through the shelf and around the device. It helps with routers, switches, UPS units and other equipment that runs warm, especially in closed cabinets. Kendall Howard offers vented versions of its component, 4-point adjustable, Centerline, center mount and sliding shelves. A solid shelf suits light devices or small parts that could fall through.

What is a center mount rack shelf used for?

A center mount shelf attaches at its midpoint to a 2-post relay rack, so the weight sits evenly in front of and behind the rails. That makes it a good choice for deep or heavy equipment on a 2-post rack. The Kendall Howard 3U Centerline Shelf gives a 24-inch deep surface and supports up to 350 lbs.

Rack Shelves

What a rack shelf does

A rack shelf turns open rack space into a flat surface for equipment that has no rack ears of its own. Common loads include UPS units, routers, modems, small servers, monitors and other non-rack-mount devices. Every shelf in this category is made by Kendall Howard. They mount with rack screws in tapped rails, or with rack screws and cage nuts in square-hole rails.

Cantilever (2-point) shelves

Cantilever shelves attach to one pair of rails, so they fit 2-post racks, wall mount racks and cabinets. The Component Shelf series uses heavy gauge steel with two strengthening flanges and a textured black powder coat. Sizes are 1U 12" (1906-1-001-01), 2U 14" (1906-1-002-02) and 3U 16" (1906-1-003-03). A vented 1U 12" version (1906-1-201-01) adds airflow. The 2U 14" Vented Eco Shelf (1906-1-010-02) uses medium gauge steel at a lower cost for lighter loads.

Center mount shelves

A center mount shelf attaches at its middle to a 2-post relay rack, so the weight is balanced front and back. The 3U Centerline Shelf (1907-3-001-03) and the 3U Vented Centerline Shelf (1907-3-000-03) give a 24" deep surface and support up to 350 lbs. The 2U Vented Center Mount Shelf (1907-3-000-02) is the economical option. The 2U 2-Piece Telco Rack Shelf (1906-3-300-02) mounts to either side of a 2-post rack and is rated at 200 lbs.

4-point and sliding shelves

4-point shelves attach to the front and rear rails of a 4-post rack or cabinet. Kendall Howard recommends this style for large, heavy devices such as servers, battery backups and UPS units. The 20" Fixed Rack Shelf (1904-1-001-01) has a slim profile that uses only the bottom portion of a U space and holds 300 lbs. The 4-Point Adjustable Shelves (1U 1906-3-007-01, 1U vented 1906-3-008-01 and 2U 1906-3-006-02) telescope to match your rail depth. Rack screws and cage nuts for these are sold separately.

Sliding shelves pull out of the rack on ball-bearing rails, so you can reach the back of a device for cabling. The 1U 20" Sliding Shelf (1922-3-300-01) mounts 4-point, adjusts from 19" to 28" deep and extends 18". The vented version (1922-3-400-01) has a 20" deep by 16.5" wide surface, extends 18" and is rated at 100 lbs.

How to choose a rack shelf

  • Rack type. On a 2-post or wall mount rack, use a cantilever or center mount shelf. In a 4-post rack or cabinet, use a 4-point or sliding shelf.
  • Weight. Ratings here run from 100 lbs on the vented sliding shelf to 350 lbs on the Centerline shelves. Heavy UPS units belong on 4-point or center mount shelves.
  • Rack units. One rack unit (1U) is 1.75 inches of rail height. Allow for the height of your device on top of the shelf's own U space.
  • Depth. Measure the device and your rail spacing. Adjustable shelves fit racks of different depths.
  • Airflow. Vented shelves let heat escape from devices that run warm.

Shelves fit our server racks and server cabinets. If your rails use square holes, add cage nuts to your order.

GET $5 OFF

FOR YOUR FIRST ORDER INSTANTLY

⟩

I’m not interested in saving money on my order

Enjoy Your Coupon Code Now!

Shop with confidence, your satisfaction is guaranteed.
⟩
WELCOME5 SHOP NOW